The FutureWEDGE™ 3100 electric vehicle barrier is available in a single or dual buttress design, with a bolt-down or shallow foundation installation, depending on the crash rating requirement. The 3100 has a plate height of 31 inches in the fully armed position and is K8/M40 (15,000 lbs @ 40 mph) and K12/M50 (15,000 lbs @ 50 mph) crash certified. Typical foundation depth for an anchor frame installation is from 8 – 12 inches. Single entrances up to 16 feet in width can be secured with the 3100 series. This model is standard with LED stop/go lights and can be supplied with a fully integrated gate arm assembly and features simple “plug and activate” installation. It is quite common for the 3100 series to be used in conjunction with more sophisticated security integration using new convergence technology.

Any typical commercial power can be use to power our barriers. The FutureWEDGE™ features a motor design that provides greater utilization of the incoming power supply and improves efficiency. Added spring assist further reduces the electrical power required to operate the barrier and increases duty cycles. The FutureWEDGE™ all electric green solution utilizes an electro mechanical actuator that eliminates the need for a hydraulic power unit or air compressor. All the associated hoses, filters, and valves, which are causes of barrier failure, are gone! This new generation barrier design reduces installation and maintenance costs, while improving reliability. Our electric design is an environmentally friendly option to protect your facility and offers high duty cycles with minimum maintenance for lower overall cost.